Heat recovery modular air-cooled
heat pump unit
1.Hot water at 55°C for free
2.Comprehensive performance coefficient up to 7.8
3.Far surpassing the national secondary energy efficiency
4.Multiple modes can be switched
5.Network control
6.One machine for multiple uses
1 Five modes, seven choices, choose what you want
Cooling mode -You can choose when you only need refrigeration and do not need hot water.
Heating mode - You can choose when you only need heating and do not need hot water.
Hot water mode-You can choose when you only need domestic hot water.
Heating + hot water mode -You can choose when you need both hot water and heating. You can set heating or hot water priority, and it can be adjusted at any time within 24 hours.
Cooling + hot water (total heat recovery) mode - You can choose when you need both refrigeration and domestic hot water (free of charge), also can set priority for refrigeration or hot water
2 Cost-effective and time-saving
In addition to meeting the normal cooling/heating needs of buildings, the waste heat generated by the unit can also be used to obtain domestic hot water of 30°C~55°C for "free", which is the best for traditional central air conditioners + water heaters (or boilers) Alternatives not only save the investment cost of another set of equipment and water system, but also save your building area and reduce the initial investment cost. One machine is better than two machines.
The heat recovery series can not only modularize 16 units between different models of the same series, but also can mix and connect 16 modular units with other series, which is more energy-efficient when running under partial load